Goodman 3.5 Ton 14.5 SEER2 Straight Cool Split System (GSXN404210+AMST42CU1400)

Goodman 3.5 Ton 14.5 SEER2 Straight Cool Split System

Condenser Model Number: GSXN404210

Air Handler Model Number: AMST42CU1400

AHRI Number: 208800189

 

Specifications:

GSXN404210

Dimensions (LxWxH): 35.5″ x 35.5″ x 39.5″ 

Nominal Cooling (BTU/h): 42,000

Decibels (dBA): 71

Compressor Stage: Single

Condenser Fan Motor:

Motor Type: PSC

Horsepower: 1/6

FLA: 0.97

Refrigeration System: 

Liquid Line: 3/8″

Suction Line: 7/8″

Valve Type: Sweat

Refrigerant Charge: 107*

Electrical Data: 

Voltage-Phase (60 Hz): 208/230-1

Minimum Circuit Ampacity: 23.1

Max. Overcurrent Protection: 40AMPS

Min./Max. Volts: 197/253

Electrical Conduit Size: 1/2″ or 3/4″

Equipment Weight: 226

*- Unit is factory charged with refrigerant for 15′ of 3/8″ liquid line. System charge must be adjusted per the Final Charge Adjustment procedure found in the Installation Instructions. 

 

 

Air Handler Specifications:

AMST42CU1400

Cabinet Dimensions (LxWxH): 21″ x 21.125″ x 53.4375″

Cooling (BTU/h): 42,000

Coil Connections: 

Liquid Line: 3/8″

Suction Line: 3/4″

Coil Drain Connect (FPT): 3/4″

Electrical Data: 

Voltage: 208/230

Minimum Circuit Ampacity: 5.9/5.9

Max. Overcurrent Device (AMPS): 15/15

Minimum VAC: 197

Maximum VAC: 253

Blower Motor:

Full Load Amps (FLA): 4.7

Horsepower: 3/4

Weight: 153

Product Features: 

• Internal factory-installed thermal expansion valves for cooling and heat pump applications

• Direct drive, multi-speed ECM blower motor

• All-aluminum evaporator coil

• Coil mounting track for quick repositioning

• Optimized for use with R-410A refrigerant

•Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard 193

• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard 193

• AHRI certified; ETL listed

• Rigid SmartFrame™ cabinet

• Horizontal or vertical configuration capabilities

• 21” depth for easier attic access

• DecaBDE-free thermoplastic drain pan with secondary drain connections

• Screw-less sides and back helps to reduce condensation when installed in humid locations

• Foil-faced insulation covers the internal casing to reduce cabinet condensation

• Galvanized, leather grain-embossed finish

• Glue-less cabinet insulation retention

• Tool-less filter access

• Field Installed 3 kW – 25 kW electric heater kits available